The first thing to do when you receive a new Mudita Bell 2 is to charge the device for at least 2-3 hours.

Charging the Mudita Bell 2

Your Bell 2 should sound a signal when you plug it in to a compatible charger. Charging it should also activate the device. If you don't hear anything when you plug it in, it most likely doesn't work with the charger that you tried it with. If that's the case, it's a good idea to try a different one with a 5V output or to charge it through a computer's USB port, which should always be 5V.

Our chargers, which can be purchased in our store along with our alarm clocks, should charge the device just fine.

Activate Clock When Unresponsive

If your clock seems to be unresponsive for any reason and charging it doesn't help, please try to perform a factory reset. This can help resolve many issues. To reset the device, press the timer and light buttons simultaneously, for 5 seconds. Release when you hear a ringing sound, and the light turns off.

Time and Alarm Settings

To set the clock's time, please rotate the smaller knob on the back of the device in the direction shown by the arrow.

To set the alarm time, please rotate the larger knob on the back of the device (the one with the orange dot) in the direction shown by the arrow.

Please note that spinning the knobs in the opposite direction may damage the clock's mechanism